Description

HUSKEY LVI-50 is a multi-service, non-melting, waterproof grease fortified with PTFE. It is designed specifically to lubricate, seal out water, and resist chemical attack under the most demanding conditions. HUSKEY LVI-50 with its excellent film strength and extreme pressure qualities, forms a tough durable film of lubrication that prevents metal to metal contact.  HUSKEY LVI-50 is a pure synthetic based lubricant that is NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

Advantages

• NSF/U.S.D.A. H-1 *Registered
• WATERPROOF
• NON-MELTING
• KOSHER APPROVED
• BIODEGRADABL
• CHEMICAL RESISTAN
• NON STAININ
• WIDE TEMPERATURE RANG
• REDUCES WEAR
• PREVENTS RUST & CORROSION

*NSF H-1 Registration No. 059323

Usage

HUSKEY LVI-50 with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces and slow to high speed bearings, operating in adverse conditions.  Because of its pure synthetic base, high load carrying capacity and wear protection characteristics, HUSKEY LVI-50 is far superior to petroleum, white oil based greases on the market today.  This makes HUSKEY LVI-50 a truly multi-service grease in both food grade and non food grade applications operating in temperatures from -10° F to 325°F.  Due to its NSF/U.S.D.A.  H-1 *Registration,  HUSKEY LVI-50 is an excellent choice for both Food Processing plants, where equipment wash down is an everyday requirement and Water Industries, where contamination of conventional petroleum lubricants is a primary environmental concern. HUSKEY LVI-50 is compatible with most rubbers and plastics and is a superior lubricant for “O” rings.  Some of its diversified uses include:

• PUMP BEARINGS
• BUSHINGS
• CAN SEAMERS
• VALVES
• GASKETS AND “O” RINGS
• CONVEYORS
• STERILIZER CHAINS
• SLIDES AND WAYS
• POOL EQUIPMENT
• ELECTRIC MOTOR
• WATER FILTER
• UNIVERSAL JOINTS

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

TEST	ASTM TEST	RESULTS
N.L.G.I. Grade	—	2
Worked Penetration 60 Strokes 10,000 Strokes	D-217 D-217	280 290
Base Oil Viscosity, cSt @ 40°C cSt @ 100°C	D-445 D-445	781 42
Pour Point, °F	D-97	-10
Flash Point, °F	D-92	325
Dropping Point, °F	D-566	NONE
Evaporation Loss, % , (10 hours @ 210°F)	D-972	1.5
Corrosion Preventative Test	D-1743	PASS
Water Washout, % Loss	D-1264	1.9
Timken OK Load, lbs	D-2509	35
4-Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm, 167°F)	D-2266	0.50
Dielectric Strength, KV	D-877	30
WGK (German Water Classification)	—	0
NSF International Registered		Kosher Certified

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY LUBE-O-SEAL is a versatile, pure synthetic, completely waterproof grease containing PTFE. It is formulated to seal out water and lubricate under the most adverse conditions.   HUSKEY LUBE-O-SEAL with its highly adhesive qualities and high load-carrying characteristics forms a tough durable film of lubrication that prevents metal-to-metal contact even under severe shock loads.  HUSKEY LUBE-O-SEAL is also NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

Advantages

• NSF/U.S.D.A. H-1 *Registered
• WATERPROOF
• NON-MELTING
• CONTAINS PTFE
• KOSHER APPROVED
• BIODEGRADABLE
• CHEMICALLY RESISTAN
• NON-STAININ
• WIDE TEMPERATURE RANGE
• REDUCES WEA
• PREVENTS RUST & CORROSIO
• HIGH DIELECTRIC STRENGTH

*NSF H-1 Registration No. 059322

Usage

HUSKEY LUBE-O-SEAL with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces, gears and slow to moderate speed bearings (about 1000 RPM maximum) operating in WET or DRY conditions from 20°F to 350°F. Due to its pure synthetic base, coupled with the addition of sub-micron size PTFE, HUSKEY LUBE-O-SEAL is an excellent choice for applications in many Industries, which requires a clean, tenacious, anti-wear grease. Because of its NSF/U.S.D.A. H-1 *Registration, HUSKEY LUBE-O-SEAL is outstanding for use in food processing plants, where equipment wash down is an everyday requirement and water Industries, where contamination with conventional petroleum lubricants is a primary environmental concern.

HUSKEY LUBE-O-SEAL is compatible with most rubbers and plastics and is a superior lubricant for “O” rings. Some of its diversified uses include:

• OPEN GEARS
• FOOD EQUIPMENT
• SLIDES AND WAYS
• STERILIZER CHAINS
• GASKETS AND “O” RINGS
• CONVEYORS
• VALVES
• BUSHINGS
• TRUNNION
• POOL EQUIPMENT

CAUTION: BEFORE PRODUCT IS UTILIZED IN AUTOMATIC LUBRICATION EQUIPMENT, PLEASE CONSULT THE HUSK-ITT CORPORATION FOR RECOMMENDATION.

Package Availability

• 3 oz. Tubes
• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

Test	ASTM Test Method	Results
N.L.G.L.Grade		2
Worked Penetration 60 Strokes 10,000 Strokes	D-217 D-217	280 290
Base Oils Viscosity, cSt @ 100°C cSt @ 40°C	D-445 D-445	208 5600
Pour Point, °F	D-97	5
Flash Point, °F	D-92	395
Dropping Point °F	D-566	None
Evaporation Loss, % (10 hours @ 210°F)	D-972	1.0
Corrosion Preventative Test	D-1743	PASS
Water Washout, % Loss	D-1264	0.01
Timken OK Load, lbs.	D-2509	40
4-Ball Wear Scar, mm (40 Kg, 75 ° C, 1 hr. @ 1200 rpm)	D-2266	0.57
Dielectric Strength, KV	D-877	30
NSF International Registered		Kosher Certified

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY HYDROLUBE GREASE represents the most advanced lubricant technology. It is an Environmentally Responsible, non-toxic, pure synthetic, waterproof lubricant formulated to provide maximum parts protection in adverse conditions of extreme loads, high water washout and chemicals. HUSKEY HYDROLUBE is NSF/U.S.D.A. H-1 *Registered which gives it full acceptability for use in all areas where incidental food or potable water contact may occur. HUSKEY HYDROLUBE does not contain any lead, chlorine, phosphorous, sulphur, chromates, antimony, benzene, free metallic or other potentially hazardous ingredients that may harm the environment.

Advantages

• ENVIRONMENTALLY RESPONSIBLE
• BIODEGRADABLE
• CHEMICALLY RESISTANT
• NON-MELTING
• WIDE TEMPERATURE RANGE (10°F to 350°F)
• NSF/U.S.D.A. H-1 *REGISTERED
• WATERPROOF
• WITHSTANDS EXTREME LOADS
• SHEEN REDUCING
• PREVENTS RUST & CORROSION

*NSF H-1 Registration No. 0593110

Usage

HUSKEY HYDROLUBE was originally designed as an Environmentally Responsible alternative for greases used in both underwater and extreme pressure applications found in Hydroelectric plants and Dam facilities. However, due to its heavy duty lubrication qualities and NSF/U.S.D.A. H-1 *Registration, it is an excellent choice for all open gears, sliding surfaces and slow to moderate moving bearings found in both FOOD PROCESSING AND WATER INDUSTRIES. HUSKEY HYDROLUBE is compatible with most rubbers and plastics which makes it a superior lubricant for “O” rings.

HUSKEY HYDROLUBE is the first choice in grease where maximum equipment protection and environmental impact is a primary concern. Some such applications include;

• TURBINE WICKET GATES
• VALVES
• FISH SCREEN EQUIPMENT
• TRUNNIONS
• OPEN GEARS
• STERILIZER CHAINS
• GATE LINKAGES
• GUIDE RAILS
• GASKETS & O-RINGS
• BUSHINGS

Package Availability

• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY HTL-500 ULTRA-LOW GRADE GREASE represents some of the most advanced lubricant technology. It is a versatile, premium quality, synthetic grease fortified with PTFE. Blended completely from pure synthetic base oils, additives and shear stable thickeners to provide maximum equipment protection in extremely low and high temperatures (Operating Range -90° to 420°F). HUSKEY HTL-500 ULTRA-LOW GRADE GREASE is also NSF/U.S.D.A. *H-1 registered and KOSHER approved, which gives it full acceptability for use in all areas where incidental food contact may occur.

Advantages

• NSF/USDA *H-1 REGISTERED
• WATER AND STEAM RESISTANT
• NON-MELTING
  
• NON-STAINING
  
• WIDE TEMPERATURE RANGE
  
• REDUCES FRICTION AND WEAR

*NSF Registration No. 059313

Usage

HUSKEY HTL-500 ULTRA-LOW GRADE GREASE is truly a multi-service lubricant for extended service under extreme low and high conditions. HUSKEY HTL-500 ULTRA-LOW GRADE GREASE has proven to be a problem solving product in a wide variety of industries and applications. Some such applications include: Freezer Door Hinges and Bearings, Oven Bearings and Chains, Pumps, Kilns, Conveyors, etc.

Package Availability

• Convenient Disposable Gun Loader 13 oz. Cartridges
• 1 gal. Pail
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

TEST	RESULTS
N.L.G.I. No.	2
Base Oil Viscosity, cSt @ 40 °CcSt @ 100 °C	17 3.9
Worked Penetration	285
Dropping Point, °F	None
Flash Point, °F	420
Pour Point, °F	-90
Timken OK Load, lbs.	35
NSF International Registered	Kosher Certified

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY HTL-500 GREASE represents some of the most advanced lubricant technology. It is a versatile, premium quality, synthetic grease fortified with PTFE. Blended completely with pure synthetic base oils, additives and shear stable thickeners to provide maximum equipment protection in extremely high and low temperatures (Operating Range -75° to over 500°F). HUSKEY HTL-500 GREASE is also NSF/ U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in all areas where incidental food contact may occur.

Advantages

• NSF/ U.S.D.A. H-1 *REGISTERED
• WATER AND STEAM RESISTANT
• NON-MELTING
• KOSHER APPROVED
  
• NON-STAINING
  
• WIDE TEMPERATURE RANGE
  
• REDUCES FRICTION AND WEAR
  
• FORTIFIED WITH PTFE

*NSF H-1 Registration No. 059312

Usage

HUSKEY HTL-500 GREASE is truly a multi-service lubricant for extended service under extreme high and low conditions. HUSKEY HTL-500 GREASE has proven to be a problem solving product in a wide variety of industries and applications. Some such applications include: Freezer bearings, oven bearings and chains, pumps, kilns, conveyors, etc.

Package Availability

• Convenient Disposable Gun Loader 13 oz. Cartridges
• 1 gal. Pail
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

TEST	ASTM TEST	RESULTS
N.L.G.I. Grade		2
Worked Penetration 60 Strokes 10,000 Strokes	D-217 D-217	265 295
Base Oils Viscosity, SUS @ 100°F SUS @ 210°F cSt @ 40°C cSt @ 100°C	D-445 D-445 D-445 D-445	240 53 47 7.9
Pour Point, °F	D-97	-75
Flash Point, °F	D-92	510
Dropping Point,°F	D-566	None
Oil Separation, % Loss	D-1742	0.0
Corrosion Preventative Test	D-1743	PASS
Four Ball Wear Scar, mm (40 Kg. 1 hr. @ 1200 rpm, 75°C)	D-2266	0.45
Four Ball E.P. Wear Load Wear Index, Kg Weld Point, Kg	D-2596 D-2596	30.6 160
NSF International Registered		Kosher Certified

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY ECO-LUBE EP 2 is a blend of the finest quality USA grown natural seed oils available then treated with the most effective anti-oxidants, extreme pressure, anti-wear and anti-corrosion additives. PTFE is added to further enhance load capacity, and reduce friction. This unique blend, together with its synthetic shear stable thickening system, provides the maximum protection against friction, wear and corrosion. HUSKEY ECO-LUBE EP 2 GREASE is readily biodegradable and contains no ozone depleting chemicals, SARA Title 313 chemicals, heavy metals, greenhouse gases, chlorine, phenols, VOC’s or Prop. 65 Chemicals. HUSKEY ECO-LUBE EP 2 is also NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur. HUSKEY ECO-LUBE EP 2 is the ultimate “Green” Grease.

Advantages

• REDUCES FRICTION & WEAR
• WIDE TEMPERATURE RANGE 
• READILY BIODEGRADABLE 
• RENEWABLE RESOURCE BASED
• NSF/U.S.D.A H-1 *REGISTERED
• ADVANCED RUST AND CORROSION PROTECTION 
• KOSHER APPROVED
• FORMULATED WITH PTFE
• NON MELTING

Usage

HUSKEY ECO-LUBE EP 2 is a truly multi-service grease for extended service under extremely high and low temperature conditions from -20°F to 500°F. HUSKEY ECO-LUBE EP 2 has proven to be a problem solving lubricant in a wide variety of industries and applications. Some such applications include all roller, sleeve and pillow block bearings, bushings, couplings, universal joints, and sliding surfaces where a multi-purpose or extreme pressure grease is required.

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

Test	ASTM Test Method	Typical Results
N.L.G.L.Grade		2
Worked Penetration, 60 Strokes	D-217	265 – 295
Dropping Point, °F	D-566	None
Base Oils Viscosity, cSt @ 40°C cSt @ 100°C	D-445 D-445	35.8 8.6
Viscosity Index	D-2270	203
Flash Point	D-92	520
Pour Point °F	D-97	-20
Corrosion Preventative Test	D-1743	Pass
Water Washout, %Loss	D-1264	0.57
4-Ball Wear Scar (75°C, 40 Kg, 1 hr.@ 1200 rpm)	D-2266	0.4
Falex Pin and “V” Block, Pass Lbs.	D-3233A (Modified)	3000
NSF International Registered		Kosher Certified

* NSF H-1 Registration No. 142968

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY 775 FMG is a multi-purpose semi-synthetic, non melting grease designed for general lubrication in food processing facilities. HUSKEY 775 FMG is truly a multi-service maintenance grease. Due to its excellent film forming characteristics and anti-wear qualities it will stay on the metal surfaces much longer than conventional greases on the market today, resulting in longer lasting lubricity, with fewer lubrication intervals. HUSKEY 775 FMG is white, odorless, tasteless and is NSF/U.S.D.A. H-1 *Registered, which gives it full acceptability for use in all areas where incidental food contact may occur.

Advantages

• NSF/U.S.D.A. H-1 *REGISTERED
• EXTREMELY WATER RESISTANT
• NON-MELTING
  
• REDUCES FRICTION & WEAR
  
• HIGH FILM STRENGTH
  
• PREVENTS RUST & CORROSION

*NSF H-1 Registration No. 059320

Usage

HUSKEY 775 FMG, with its semi-synthetic base oils and polymer additives, is completely resistant to water washout, friction and chemical attack. This makes HUSKEY 775 FMG the Professional’s Choice for all conveyor bearings, ball bearings, journal bearings, roller bearings, universal joints and all other lubrication points having sliding or rolling friction requiring a multi-purpose NSF/U.S.D.A. H-1 *Registered grease.

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

TEST	ASTM METHOD	RESULTS
N.L.G.I. Grade		2
60 Stroke Worked Penetration	D-217	280
Base Oil Viscosity, SUS @ 100°F SUS @ 210°F cSt @ 40°C cSt @ 100°C	D-445 D-445 D-445 D-445	822 78 156 14.6
Pour Point, °F (°C)	D-97	10 (-12)
Flash Point, °F	D-92	400 (204)
Dropping Point, °F (°C)	D-566	None
Corrosion Preventative Test	D-1743	PASS
Timken OK Load, lbs.	D-2509	30
NSF International Registered		Kosher Certified

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.