Description

HUSKEY SPG-300 SERIES OILS are formulated from Polyalkylene glycol (PAG) base oils and carefully selected additives to provide long service life, excellent wear protection and protection against rust and corrosion. The combination of outstanding oxidation resistance and thermal stability at high temperatures, a very high viscosity index, and excellent low-temperature properties makes them suitable for year round use over a wide temperature range. HUSKEY SPG-300 SERIES OILS are NSF/U.S.D.A. H-1 *Registered and KOSHER approved which gives them full acceptability for use in all areas where incidental food contact may occur.

Usage

HUSKEY SPG-300 SERIES OILS were primarily designed for the lubrication of all worm, spur, herringbone and planetary industrial gear sets. Some applications include highly loaded gear boxes used in the paper, steel, oil, textile, lumber and cement industries where gear protection and maximum oil life are required. Because HUSKEY SPG-300 SERIES OILS provide better wear protection, thermal and oxidation stability, and reduced sludge and deposit formation they are also an excellent choice for all types of air compressors and anti-friction bearings where a HIGH PERFORMANCE OIL is required or desired.

Advantages

• Reduces Friction and Wear
• Oxidation and Corrosion Protection
• Reduces System Deposits
• NSF H-1 Registered (No. 154402)
• High Thermal Conductivity
• Extends Equipment and Lubricant Life
• Reduces Energy Consumption
• KOSHER Approved

*NSF H-1 Registration No. 154402

Package Availability

• Convenient 1 gal. Jugs (4/case)
• 5 gal. Pails
• 15 gal. Kegs
• 55 gal. Drums

Typical Properties

Typical Results

ISO Grade	32	46	68	100	150	220	320	460
Color	Clear	Clear	Clear	Clear	Clear	Clear	Clear	Clear
Viscosity, cSt @ 40°C	31	46	72	109	139	225	337	461
Viscosity, cSt @ 100°C	6.8	9.2	14.2	20.2	24.9	36.8	56.1	70.5
Viscosity Index	156	186	208	210	213	215	235	232
Flash Point,°F	320	400	410	410	410	420	420	440
Pour Point,°F	-65	-60	-55	-55	-55	-50	-45	-30
Corrosion Test	Pass	Pass	Pass	Pass	Pass	Pass	Pass	Pass
Four Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm)	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4
FZG Gear Test, Stage Pass	11	11	11	12	12	12	12	12
NSF International Registered								Kosher Certified

Seal Compatibility – HUSKEY SPG-300 SERIES OILS are not compatible with most standard seal materials used for mineral oils or synthetic hydrocarbons. When converting from mineral oil or synthetic hydrocarbons to HUSKEY SPG-300 SERIES, seal compatibility must be considered. FKM, VMQ and HNBR seals are normally suitable for use with PAG. In all cases, operating conditions and the variability of elastomer properties from different manufactures should be considered. For best results, consult the equipment supplier or seal manufacturer for specific recommendations.

Compatibility with Other Lubricants – HUSKEY SPG-300 Series Oils are not compatible with petroleum oils and most other synthetic lubricants. When changing from mineral oil or other synthetic products to HUSKEY SPG-300 Series, it is critical to do a complete flush, drain and refill. Please refer to HUSKEY’S Conversion procedure when performing a changeover from one of these products to SPG-300 Series Oils.

Paint Compatibility – PAG-based lubricants can sometimes soften industrial paints, so internal gearbox surfaces should be unpainted or coated with a resistant material.

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY HLO SERIES OILS are heavy duty, multi-functional, anti-wear oils designed to meet the demanding needs of a wide variety of modern industrial equipment. They have been formulated from the highest quality refined paraffinic base stocks and latest additives to provide excellent friction reducing properties coupled with rust, oxidation and foaming protection, thus ensuring longer service life in a wide variety of applications. HUSKEY HLO SERIES OILS are non-detergent oils formulated with special additives to condition seals and reduce leaking. It is also a non-detergent product.

Usage

• HYDRAULIC EQUIPMENT
• VACUUM PUMPS
• CHAINS
• GENERAL PURPOSE OILING
• AIR LINE LUBRICATION
• GEAR BOXES

Package Availability

• Convenient 1 gal. Jugs (4/case)
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY HI-LO SERIES OILS are a blend of the finest quality, pure synthetic oils available and treated with the most effective extreme pressure, corrosion inhibitors, anti-oxidant, anti-foam and anti-wear additives. This unique combination provides maximum equipment protection in extremely high and low temperature applications. HUSKEY HI-LO SERIES OILS are NSF/U.S.D.A. H-1 *Registered and KOSHER approved which gives them full acceptability for use in all areas where incidental food contact may occur.

Advantages

• WIDE TEMPERATURE RANGE
• WATER AND STEAM RESISTANT
• REDUCES FRICTION AND WEAR
• PREVENTS RUST, OXIDATION AND CORROSION
  
• NSF/U.S.D.A. H-1 *Registered
  
• BIODEGRADABLE
  
• NON-STAINING
  
• KOSHER APPROVED

*NSF H-1 Registration No. 059309

Usage

HUSKEY HI-LO SERIES OILS are truly multi-service lubricants for extended service under extremely high and low temperature conditions. (From -82°F to 558°F). HUSKEY HI-LO SERIES OILS have proven to be problem solving lubricants in a wide variety of industries and applications. Some applications include: general purpose oiling, oven chains, airline lubrication, hydraulic equipment, heat exchangers, worm, spur, herringbone, and planetary gear boxes, reciprocating, centrifugal and rotary air compressors and vacuum pumps, depending on viscosity grade required.

Package Availability

• Convenient 1 gal. Jugs (4/case)
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

Test	ASTM Test Method	22 ISO GRADE	32 ISO GRADE	46 ISO GRADE
S.A.E. GRADE, wt.		5	10	20
Viscosity, cSt @ 40° C cSt @ 100° C	D-445 D-445	22 4.7	32 6.1	46 7.9
Viscosity Index	D-2270	136	141	143
Flash Point	D-92	440	478	486
Pour Point °F	D-97	-82	-78	-67
Four Ball Wear Scar (40 Kg, 75 °C, 1 hr, 1200 rpm)	D-4172	0.37	0.36	0.36
Conradson Carbon, wt. %	D-189	<0.5	<0.5	<0.5
Oxidation Test, Minimum Hours	D-943	20,000	20,000	20,000
FZG Gear Test , Stage Pass	DIN 51354	11	12/11	12/11
Service Temperature Range, ºF		-82 to 440	-78 to 478	-67 to 486
Test	ASTM Test Method	68 ISO GRADE	100 ISO GRADE	150 ISO GRADE
S.A.E. GRADE, wt.		—	30	40
Viscosity, cSt @ 40° C cSt @ 100° C	D-445 D-445	68 9.6	100 13.4	150 18.4
Viscosity Index	D-2270	121	133	138
Flash Point	D-92	507	520	535
Pour Point °F	D-97	-65	-55	-48
Four Ball Wear Scar (40 Kg, 75 °C, 1 hr, 1200 rpm)	D-4172	0.35	0.35	0.34
Conradson Carbon, wt. %	D-189	<0.5	<0.5	<0.5
Oxidation Test, Minimum Hours	D-943	20,000	20,000	20,000
FZG Gear Test , Stage Pass	DIN 51354	12	12	12
Service Temperature Range, ºF		-65 to 507	-55 to 520	-48 to 535
Test	ASTM Test Method	220 ISO GRADE	320 ISO GRADE	460 ISO GRADE
S.A.E. GRADE, wt.		90	—	140
Viscosity, cSt @ 40° C cSt @ 100° C	D-445 D-445	220 24.9	320 33.7	460 45.1
Viscosity Index	D-2270	143	148	153
Flash Point	D-92	540	550	558
Pour Point °F	D-97	-44	-37	-25
Four Ball Wear Scar (40 Kg, 75 °C, 1 hr, 1200 rpm)	D-4172	0.34	0.33	0.33
Conradson Carbon, wt. %	D-189	<0.5	<0.5	<0.5
Oxidation Test, Minimum Hours	D-943	20,000	20,000	20,000
FZG Gear Test , Stage Pass	DIN 51354	12	12	12
Service Temperature Range, ºF		-44 to 540	-37 to 550	-25 to 558
NSF International Registered				Kosher Certified

*NSF H-1 Registration No. 059309

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY N-500 SERIES OILS are a blend of highest quality selected paraffinic base oils coupled with the finest rust and oxidation resistant additives available. This unique combination produces an exceptional lubricating oil with excellent thermal stability and low carbon forming characteristics. Formulated with only high-viscosity index oils to minimize viscosity changes during high and low temperature variations. These oils have extremely high film strength, to keep working metal parts separated, thus reducing friction and wear. Compounded to meet service requirements of Denison HF-2 and Cincinnati Milicrons high temperature heat stability test.

Advantages

• Minimal Viscosity Change at Operating Temperatures
• Rust and Oxidation Protection
• Low Carbon Forming
• Compatible with Sealants and Painted Surfaces
• High Film Strength
• Reduces Friction and Wear
• Extends Equipment Life

Usage

HUSKEY N-500 SERIES OILS were designed primarily for all types of Air Compressors requiring non-detergent oils. These versatile oils are offered in several viscosity grades to meet the different needs of reciprocating, centrifugal and rotary compressors. Because of their anti-wear, anti-foam and excellent stability characteristics, they show outstanding performance when used as turbine oils, drip oils, hydraulic oils or general purpose lubricating oils.

Package Availability

• Convenient 1 gal. Jugs (4/case)
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY FG 300 SERIES OILS are a blend of the finest U.S.P. technical white mineral oils incorporating the most effective extreme pressure, oxidation and corrosion inhibitors available. HUSKEY FG-300 SERIES OILS are NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives them full acceptability for use in all areas where incidental food contact may occur.

Usage

HUSKEY FG 300 SERIES OILS are highly effective rust-resistant lubricating oils designed for use in food processing equipment where incidental food contact may occur. Excellent for use in slides, guides, filler pistons, chains, etc.

Advantages

• NSF/USDA H-1 Registered ( No. 059308)
• KOSHER Approved
• Excellent Anti-Wear and Anti-Rust Properties
• Water and Steam Resistant
• Minimizes Contamination Problems
• Extends Equipment Life

Package Availability

• Convenient 1 gal. Jugs (4/case)
• 5 gal. Pails
• 15 gal. Kegs
• 55 gal. Drums

Typical Properties

ISO Grade	22	32	46	68	100	150	220	320	460
Color	Clear	Clear	Clear	Clear	Clear	Clear	Clear	Clear	Clear
Viscosity, cSt @ 40°C	22.1	33.9	50.3	72.2	95.5	144	235	317	467
Viscosity, cSt @ 100°C	4.3	5.6	7.3	9.2	11.2	15.9	22.4	27.9	37.0
Viscosity Index	103	103	105	104	104	116	116	116	120
Flash Point,°F	405	420	450	480	480	405	420	450	480
Pour Point,°F	10	12	14	15	15	15	17	20	20
Neutralization Number	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5
Corrosion Test	Pass	Pass	Pass	Pass	Pass	Pass	Pass	Pass	Pass
Copper Strip Corrosion	1a	1a	1a	1a	1a	1a	1a	1a	1a
Four Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm)	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4
NSF International Registered									Kosher Certified

The name of this product or group of products is for product identification only. HUSK-ITT CORPORATION makes no warranties, representations or conditions of any kind expressed or implied, whether for merchantability or fitness with respect to these products. The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT CORPORATION sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY 15A14 SERIES OILS are waterproof, totally synthetic lubricating fluids that are biodegradable, do not emulsify with water, have excellent extreme pressure characteristics and are NSF/U.S.D.A. H-1 *Registered and KOSHER approved for use in food processing, water and waste water treatment plants.

Advantages

• WATERPROOF
• RUST AND CORROSION RESISTANT
• REDUCES FRICTION AND WEAR
• HARSH CHEMICAL RESISTENT
  
• NSF/U.S.D.A. H-1 *Registered
  
• BIODEGRADABLE
  
• NON-STAINING
  
• KOSHER APPROVED

NSF H-1 *Registration No. 059317

Usage

HUSKEY 15A14 SERIES OILS were formulated to be used in a wide variety of plant applications. The extreme pressure properties and resistance to forming emulsions with water make them an excellent lubricant for vertical turbine pumps in water and waste treatment plants. Due to their low foaming characteristics, they are excellent for hydraulic systems, especially in food processing facilities. The ability of HUSKEY 15A14 SERIES OIL droplets to coalesce rapidly makes them an excellent choice for mist lubrication systems. HUSKEY 15A14 SERIES OILS are used in food processing plants, where incidental food contact may occur, and in other manufacturing facilities for gear boxes, slides, guides, chains, etc.

Package Availability

• Convenient 1 gal. Jugs (4/case)
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

**NSF/USDA H-1 REGISTERED: Authorized for use in federally inspected meat and poultry plants.

Test	ASTM Test Method	22 ISO GRADE	32 ISO GRADE	46 ISO GRADE
Viscosity, cSt @ 40° CcSt @ 100° C	D-445 D-445	24.2 4.6	35.2 4.6	47.8 6.3
Viscosity Index	D-2270	69	75	83
Flash Point	D-92	280	280	280
Pour Point °F	D-97	-50	-45	-45
Corrosion Preventative Test	D-665	PASS	PASS	PASS
Dielectric Strength, KV	D-877	35	35	35
Four Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm)	D-2266	0.50	0.50	0.50
Test	ASTM Test Method	68 ISO GRADE	100 ISO GRADE	150 ISO GRADE
Viscosity, cSt @ 40° C cSt @ 100° C	D-445 D-445	72 7.5	107.8 11	165 12.6
Viscosity Index	D-2270	87	87	87
Flash Point	D-92	280	280	290
Pour Point °F	D-97	-45	-40	-40
Corrosion Preventative Test	D-665	PASS	PASS	PASS
Dielectric Strength, KV	D-877	35	35	35
Four Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm)	D-2266	0.50	0.55	0.55
Test	ASTM Test Method	220 ISO GRADE	320 ISO GRADE	460 ISO GRADE
Viscosity,cSt @ 40° CcSt @ 100° C	D-445 D-445	237.5 21	363.7 23	496.5 31
Viscosity Index	D-2270	88	89	90
Flash Point	D-92	305	310	320
Pour Point °F	D-97	-35	-25	-20
Corrosion Preventative Test	D-665	PASS	PASS	PASS
Dielectric Strength, KV	D-877	35	35	35
Four Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm)	D-2266	0.58	0.58	0.58
NSF International Registered				Kosher Certified

*NSF/USDA H-1 REGISTERED: Authorized for use in federally inspected meat and poultry plants.