HUSK-ITT Corporation offers a wide variety of products that are formulated for your application. Use the selector to choose your application and view our most popular products.

HUSK-ITT Corporation offers a wide variety of products that are formulated for your application. Use the selector to choose your application and view our most popular products.

HUSK-ITT Corporation offers a wide variety of products that are formulated for your application. Use the selector to choose your application and view our most popular products.

HUSK-ITT Corporation offers a wide variety of products that are formulated for your application. Use the selector to choose your application and view our most popular products.

HUSK-ITT Corporation offers a wide variety of products that are formulated for your application. Use the selector to choose your application and view our most popular products.

HUSK-ITT Corporation offers a wide variety of products that are formulated for your application. Use the selector to choose your application and view our most popular products.

HUSK-ITT Corporation offers a wide variety of products that are formulated for your application. Use the selector to choose your application and view our most popular products.

Description

The HUSKEY PF Series of greases are made from pure perfluoropolyether (PFPE) base oils and treated with state-of-the-art additives; then thickened with PTFE to form a shear-stable grease. They can be used in a myriad of applications due to their excellent chemical resistance, wide temperature range, low volatility, high load-carrying-ability, high oxidative and thermal stability, non-toxicity, excellent radiation resistance, high volume resistivity and low pour point.

Advantages

• CHEMICALLY RESISTANT
• HIGH THERMAL AND OXIDATIVE STABILITY
• HIGH DIELECTRIC STRENGTH
  
• NON-FLAMMABLE
  
• WIDE TEMPERATURE RANGE
  
• MULTI-PURPOSE APPLICATIONS

Usage

Whenever one finds limitations with their present grease, one of the HUSKEY PF-Series Greases will meet the challenging requirements.  For example, HUSKEY PF Series Greases do not attack seals under high temperature; they are not attacked by fuming sulfuric acid, or high pH caustic sodium hydroxide; and they have no flash point, thus they are safe under any condition. They are safe to use in partial or pure oxygen service, and meet ASTM D2512 requirements.  ASTM D 2512 is the accepted standard for determining grease compatibility in oxygen rich environments. They can be used continually at 550°F, so they find a multitude of uses in high temperature applications. They have low pour points for excellent low temperature performance. They have very low volatility at high temperatures, so they are excellent in sealed-for-life bearing applications. They have high extreme pressure (EP) characteristics, so they can be used in heavily loaded gears and bearings, especially the PF-29 which contains molybdenum disulfide (Moly) to further enhance its extreme pressure capability.

HUSKEY PF-30 and PF-29 are designed for moderate to high speed bearings while PF-27 is designed for slow to moderate speeds up to 3000 RPM. HUSKEY PF-27 has better high-temperature and high-loading characteristics than HUSKEY PF-30. HUSKEY PF-27 & PF 30 are NSF/U.S.D.A. H-1 *Registered and KOSHER approved; which gives it full acceptability for use in all areas where incidental food contact may occur.

CAUTION: HUSKEY PF-SERIES Greases may react with new aluminum or magnesium under high temperature conditions over 500°F.

Package Availability

• 2-oz. Jars
• 4-oz. Jars
• 1-1/2 lb. Jars and Grease Cartridges
• Custom Packaging Available Upon Request

Typical Specifications

Test	PF-30	PF-27	PF-29
Color	White	White	Moly Grey
N.L.G.L.Grade	2	2	2
NSF/USDA H-1 Registered	Yes	Yes	No
Penetration, Worked	265-295	265-295	265-295
Base Oil Viscosity @ 104°F, cSt	140	450	325
Flash Point, °F	None	None	None
Temperature Range, °F	-40 to +575	-13 to +575	-40 to +575
Evaporation, Loss %, 22 hours @ 400ºF	4	0.5	2
Four Ball EP Test, EP Weld Load, Kg	650	800+	800+
Four Ball Wear, mm, 1 hour, 75 ºC, 40 Kg	0.60	0.60	0.50
NSF International Registered			Kosher Certified

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY LVI-50 is a multi-service, non-melting, waterproof grease fortified with PTFE. It is designed specifically to lubricate, seal out water, and resist chemical attack under the most demanding conditions. HUSKEY LVI-50 with its excellent film strength and extreme pressure qualities, forms a tough durable film of lubrication that prevents metal to metal contact.  HUSKEY LVI-50 is a pure synthetic based lubricant that is NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

Advantages

• NSF/U.S.D.A. H-1 *Registered
• WATERPROOF
• NON-MELTING
• KOSHER APPROVED
• BIODEGRADABL
• CHEMICAL RESISTAN
• NON STAININ
• WIDE TEMPERATURE RANG
• REDUCES WEAR
• PREVENTS RUST & CORROSION

*NSF H-1 Registration No. 059323

Usage

HUSKEY LVI-50 with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces and slow to high speed bearings, operating in adverse conditions.  Because of its pure synthetic base, high load carrying capacity and wear protection characteristics, HUSKEY LVI-50 is far superior to petroleum, white oil based greases on the market today.  This makes HUSKEY LVI-50 a truly multi-service grease in both food grade and non food grade applications operating in temperatures from -10° F to 325°F.  Due to its NSF/U.S.D.A.  H-1 *Registration,  HUSKEY LVI-50 is an excellent choice for both Food Processing plants, where equipment wash down is an everyday requirement and Water Industries, where contamination of conventional petroleum lubricants is a primary environmental concern. HUSKEY LVI-50 is compatible with most rubbers and plastics and is a superior lubricant for “O” rings.  Some of its diversified uses include:

• PUMP BEARINGS
• BUSHINGS
• CAN SEAMERS
• VALVES
• GASKETS AND “O” RINGS
• CONVEYORS
• STERILIZER CHAINS
• SLIDES AND WAYS
• POOL EQUIPMENT
• ELECTRIC MOTOR
• WATER FILTER
• UNIVERSAL JOINTS

Package Availability

• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

TEST	ASTM TEST	RESULTS
N.L.G.I. Grade	—	2
Worked Penetration 60 Strokes 10,000 Strokes	D-217 D-217	280 290
Base Oil Viscosity, cSt @ 40°C cSt @ 100°C	D-445 D-445	781 42
Pour Point, °F	D-97	-10
Flash Point, °F	D-92	325
Dropping Point, °F	D-566	NONE
Evaporation Loss, % , (10 hours @ 210°F)	D-972	1.5
Corrosion Preventative Test	D-1743	PASS
Water Washout, % Loss	D-1264	1.9
Timken OK Load, lbs	D-2509	35
4-Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm, 167°F)	D-2266	0.50
Dielectric Strength, KV	D-877	30
WGK (German Water Classification)	—	0
NSF International Registered		Kosher Certified

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.

Description

HUSKEY LUBE-O-SEAL is a versatile, pure synthetic, completely waterproof grease containing PTFE. It is formulated to seal out water and lubricate under the most adverse conditions.   HUSKEY LUBE-O-SEAL with its highly adhesive qualities and high load-carrying characteristics forms a tough durable film of lubrication that prevents metal-to-metal contact even under severe shock loads.  HUSKEY LUBE-O-SEAL is also NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

Advantages

• NSF/U.S.D.A. H-1 *Registered
• WATERPROOF
• NON-MELTING
• CONTAINS PTFE
• KOSHER APPROVED
• BIODEGRADABLE
• CHEMICALLY RESISTAN
• NON-STAININ
• WIDE TEMPERATURE RANGE
• REDUCES WEA
• PREVENTS RUST & CORROSIO
• HIGH DIELECTRIC STRENGTH

*NSF H-1 Registration No. 059322

Usage

HUSKEY LUBE-O-SEAL with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces, gears and slow to moderate speed bearings (about 1000 RPM maximum) operating in WET or DRY conditions from 20°F to 350°F. Due to its pure synthetic base, coupled with the addition of sub-micron size PTFE, HUSKEY LUBE-O-SEAL is an excellent choice for applications in many Industries, which requires a clean, tenacious, anti-wear grease. Because of its NSF/U.S.D.A. H-1 *Registration, HUSKEY LUBE-O-SEAL is outstanding for use in food processing plants, where equipment wash down is an everyday requirement and water Industries, where contamination with conventional petroleum lubricants is a primary environmental concern.

HUSKEY LUBE-O-SEAL is compatible with most rubbers and plastics and is a superior lubricant for “O” rings. Some of its diversified uses include:

• OPEN GEARS
• FOOD EQUIPMENT
• SLIDES AND WAYS
• STERILIZER CHAINS
• GASKETS AND “O” RINGS
• CONVEYORS
• VALVES
• BUSHINGS
• TRUNNION
• POOL EQUIPMENT

CAUTION: BEFORE PRODUCT IS UTILIZED IN AUTOMATIC LUBRICATION EQUIPMENT, PLEASE CONSULT THE HUSK-ITT CORPORATION FOR RECOMMENDATION.

Package Availability

• 3 oz. Tubes
• Convenient Disposable Gun Loader 14 oz. Cartridges
• 5 gal. Pail
• 15 gal. Keg
• 55 gal. Drum

Typical Specifications

Test	ASTM Test Method	Results
N.L.G.L.Grade		2
Worked Penetration 60 Strokes 10,000 Strokes	D-217 D-217	280 290
Base Oils Viscosity, cSt @ 100°C cSt @ 40°C	D-445 D-445	208 5600
Pour Point, °F	D-97	5
Flash Point, °F	D-92	395
Dropping Point °F	D-566	None
Evaporation Loss, % (10 hours @ 210°F)	D-972	1.0
Corrosion Preventative Test	D-1743	PASS
Water Washout, % Loss	D-1264	0.01
Timken OK Load, lbs.	D-2509	40
4-Ball Wear Scar, mm (40 Kg, 75 ° C, 1 hr. @ 1200 rpm)	D-2266	0.57
Dielectric Strength, KV	D-877	30
NSF International Registered		Kosher Certified

The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.